Network Reference · /cidr/192.168.8.0/24

192.168.8.0/24 — the Huawei hotspot subnet

192.168.8.0/24 is the default LAN of Huawei's mobile broadband gear: pocket hotspots like the E5576, LTE and 5G CPEs like the B535, and a long string of carrier-branded rebadges. The gateway is always 192.168.8.1.

Like ASUS's 50.x, the choice is anti-collision engineering: a travel router gets plugged into hotel and home networks of every flavor, so it camps on a /24 that almost nothing else uses.

The numbers
Network address 192.168.8.0
Subnet mask 255.255.255.0
Wildcard mask 0.0.0.255
Broadcast address 192.168.8.255
First usable 192.168.8.1
Last usable 192.168.8.254
Total addresses 256
Usable hosts 254

The HiLink interface

Browsing to 192.168.8.1 opens Huawei's HiLink web UI: signal strength, data usage, the SMS inbox on LTE models, and the APN settings you will need if the SIM does not auto-configure. The same address hosts the API that third-party signal and battery widgets poll.

Travel-router caveats

These devices are NAT routers by necessity — the carrier side is a single LTE interface — and port forwarding from the Internet is impossible on CGNAT carriers no matter how the box is configured. If you bridge a hotspot into an existing LAN, first check the upstream is not already on 192.168.8.x before wondering why the routes loop.

CIDR Calculator

Run the math on 192.168.8.0/24 — or any other block

Open in calculator
Free forever No signup Runs 100% in your browser
FAQ

Frequently asked questions

What is 192.168.8.1?

The default gateway and admin address of Huawei mobile hotspots and LTE/5G CPEs. It opens the HiLink management interface with signal stats, SMS and APN settings.

How do I log into my Huawei hotspot?

Connect to its Wi-Fi, browse to 192.168.8.1, and use the admin password printed on the device label or under the battery. Carriers sometimes rebrand the UI, but the address stays the same.

Can I port-forward on a Huawei LTE router?

Locally yes — the UI exposes virtual servers. But mobile carriers almost universally use CGNAT, so inbound connections from the Internet will not reach you regardless of router configuration.